Video Category: Collaborative Robots
FastARC® CW welding robot for low volume/high mix shops
For the low volume/high mix shop, Acieta’s new FastARC CW welding robot offers simple programming for quick changeovers and same-day setup. The FastARC CW is typically ready to deliver in just a few weeks, so shops can be up and running in no time. Visit acieta.com/cw for more information.
This FANUC COBOT is as easy to use as App’s on my phone
If you’re in search of one of the easiest and most reliable methods of automation then consider this from FANUC. Tony is at Steakfest in North America where one of the solutions he’s interrogating is the new CRX ROBOT from FANUC available and supported in North America by Acieta. Just #soeasy
New ways to load and unload machine tools
Tony visits Acieta in North America to learn more about modern and flexible ways of loading and unloading machine tools. We watch COBOTS in action and see why many machine shops are opting for these safe, flexible automation solutions.
Changing Batteries on a FastLOAD CX1000 Cobot from Acieta
Todd Fickau, National Service Manager at Acieta, explains how to perform the only preventive maintenance necessary on a FastLOAD CX1000 cobot: change its batteries.
FastLOAD CX1000: Setting Up Payloads
Acieta’s Brad Lund demonstrates how to set up payloads on the FastLOAD CX1000.
FastLOAD CX1000: How to Program an OnRobot 3-Finger Gripper
Acieta’s Jake Corning demonstrates how to set up a FastLOAD CX1000 OnRobot 3-Finger Gripper.
FastARC CW: Basic Installation
Acieta Programming Manager Brad Lund shares the simple steps to install a FastARC CW collaborative welding robot.
FastLOAD CX1000: Basic Installation
Acieta’s Jake Corning demonstrates easy steps on how to set up a FastLOAD CX1000 collaborative robot.
FastLOAD CX1000 Cobot: How to Set Up and Use the Floor Mount Kit
Learn how to set up and use the floor mount kit on a FastLOAD CX1000 collaborative robot by following this demonstration from Acieta’s Jake Corning.
FastLOAD CX1000 Cobot: How to Teach a User Frame
Acieta’s Jake Corning demonstrates how to establish a user frame for teaching points and jogging the robot on a FastLOAD CX1000 collaborative robot.
Programming an Acieta FastLOAD CX1000 Cobot
Acieta’s Jake Corning shares the simple steps to program a FastLOAD CX1000 collaborative robot.
Acieta FastLOAD CR2000 Cobot: How to Recover From a Contact Stop
Need to recover from a contact stop on a FastLOAD CR2000 collaborative robot? Follow these simple steps provided by Acieta Programming Manager Brad Lund.